To Mount your ErgoGlide® (Warning: When applying pressure to any glass use caution.)

To mount ErgoGlide®, first clean glass surface with alcohol wipe, use of any other glass cleaner or chemical may interfere with the bonding of ErgoGlide® adhesive, allow glass to dry for 5 minutes. Sliding glass windows can be pushed off their track if not held firmly while applying your ErgoGlide®. Remove paper strip to expose adhesive, apply ErgoGlide® immediately while firmly holding for 30 seconds. In some cases it may be easier to apply the ErgoGlide® from the customers’ side of the window. Before use, allow ErgoGlide® to set overnight.

Please email us with your questions and comments.

ErgoGlide® Removal

To remove your ErgoGlide® simply use adhesive remover or rubbing alcohol to loosen the tape bond. It is recommended you use a small flexible putty knife to gently work around and under your ErgoGlide® tape until it is removed.

One Time Use

Your ErgoGlide® was designed to only be applied once. The ErgoGlide® can not be reapplied once the bond has been broken nor can new adhesive tape be applied because of special primers and adhesives used in our manufacturing process.